- Part No. : SER400006£220.97
Sport type, clublevel 1/10 scale 190mm electric powered touringcar. 4 wheel-belt-drive, RCM hydraulic shocks, front nylon spool, rear geardiff, independent suspension, black glass-fibre shocktowers, chassis and top-deck. Fully upgradable to race spec. No electronics, tyres/wheels, or body included.
- Part No. : SER400041£719.10
- Part No. : SER400043£395.10
X20FWD ’21 improves on the very successful X20FWD touring car. The chassis is based on the popular mid motor design, using a light weight and strong 1-piece motor mount concept, without any interference between the front and rear chassis flex while still allowing center flex adjustability. The advantage for this style of design is to allow maximum flex capabilities without impacting the drivetrain, meaning smoother power delivery, more consistency and less chance of stripping spurs. And it uses the all new dual ball bearing DJC shafts and our new Steering hub allows adjustment of Axle height, offset and Roll center.
- Part No. : SER410007£488.16
- Part No. : SER410052£413.10
- Part No. : SER410067£488.16
Serpent introduces the new Serpent F110 SF4 Formula 1 car. The next evolution of the Serpent F110 platform takes F1 1/10 racing to new levels of performance. The F110 SF4 is based on the racing experience gained over the last 2 years of racing IDFM, ETS, TiTC, CETC and races all over the world.
- Part No. : SER420003£156.96
- Part No. : SER500014£439.07
Serpent SRX2 Gen3 “Carpet Spec” 1-10 Electric Powered 2wd Racing Buggy The Srx-2 Gen3 has been completely re-designed from the ground up. The new SRX-2 needed to be slimmer, stylish, tougher, easier to work on, and above all else Faster. With over 85% of the parts being new, all the while, still being able to use most all previous SRX-2 parts, this car is an absolute masterpiece of construction. You can build it to any configuration you wish, new and/or old. Here at Serpent’s Secret R&D office, we are un-rivalled in our interest to win, and feel, this car will take you to more checkered flags than any previous SRX-2model we have ever made, Guaranteed.…!!!!!
- Part No. : SER500015£603.36
10 years ago, we started the journey into the development of a belt driven 1:10 4wd offroad car, with the intent to revolutionize the market. The original SRX-4 was born, although it was a good car, it had its short comings. Since that time we have continued to develop, test, design and re-designed it behind the scenes in our secret lab. It had to be easier than any car of its kind to work on, handle with precision and ease, be maintenance friendly, and share more parts across the 1:10 categories we compete in. Aside from those targeted positives it also needed to be better than any 4wd car in performance we have created to date. Foresight was key factor, when the SRX-2 Gen3 was being born, we already had a good understanding how to craft together from its DNA the ultimate 4wd version. The two cars had to be worked on in tandem to make sure it was possible to reach the goals we had set forth. The SRX-4 Gen 3 shares over 50% of its SRX-2 Gen3 relative, an accomplishment we are quite proud of. This was really important as we didn’t want customers to have to purchase a significant amount of new parts just to operate two cars. Lowering operational costs is always a positive thing, and there is no doubt we have managed to achieve this goal. The SRX-4 Gen3 is a belt driven masterpiece, when evolution becomes the revolution.
- Part No. : SER600020£862.56
Our new 1/8 buggy racing platform is now ready. Based on our innovative and fast 1/8 SRX8 EVO chassis, the SRX8 PRO brings our 1/8 buggy to a higher level with more traction, easier to drive and better lap times! Key features: - New Large Volume Differentials and oversized gears - New Ball Bearing Raced Steering Rack, Steering System - New Inclined Caster Blocks and Steering Spindles - New Plus 15mm Super Tough Wing Mount -New Mountable Chassis Weights (optional)
- Part No. : SER600021£804.96
The driving force in a race cars success is determined by those willing to back it. Serpent has worked tirelessly to improve, innovate and produce the best Remote Control cars this planet has seen. We strive to produce the highest quality parts, using nothing short of the best materials money can buy. We are extremely proud to present the next level of innovation utilizing many new parts produced for the SRX8 line of cars. With the new combination of parts, it’s easier than ever to drive, while still producing wicked fast lap times. Without further a due, let’s talk all things SRX8-E
- Part No. : SER600059£891.36
Serpent SRX8 Truggy GP 1/8 4wd The wait is over……After over 8 years, Serpent has answered the call of the wild, and is proud to introduce the all new SRX8-T. Transforming the already successful SRX8 platform into a Truck was not just expected, but a necessity. With countless years of learning our original S811T platform, we embarked on a mission to create a vehicle that would raise the bar of expectation in the truggy category. Considering all key factors: performance, reliability, durability, ease of assembly as well as maintenance, coupled with all new suspension geometry we feel this new truggy is poised for success. Using all of our high quality metals, plastics and rubber, we spared zero when it came to building the best product we could. During testing the truck was nothing short of exceptional, jumping was improved, traction improved, balance improved, durability improved, this is simply the best truggy we have ever produced. Without Further a due, let’s get started with all the new features of the SRX8-T
- Part No. : SER600060£764.10
The SRX8-GTe LWB is an all new electric powered platform specifically designed for the 1/8th “GT” category. The car is based off the high level of performance experienced in the SRX8-GT and proven durability of the SRX8 line of cars. With Balance and speed in mind we opted for the saddle layout, which opened up many additional advantages in the design and performance on the track. With the highest quality materials, our plastics and metals simply can’t be beat. Our designs can be copied, but our quality can’t!!!!
- Part No. : SER600064£804.96
After the introduction of the long awaited SRX8-T, Serpent shifted into high gear, and prepared to complete the entire 1/8th line with the SRX8-T Electric. Transforming the Nitro version into an E version in a short time was nothing short of our highest priority. Take the best Nitro Truggy we have ever developed, and go electric. Retain all the key factors: performance, reliability, durability, ease of assembly as well as maintenance, coupled with all new suspension geometry, we feel this all new E Truggy is built for success. Using all of our high quality metals, plastics and rubber, we spared zero when it came to building the best product we could. During testing this all new E truggy exceeded all expectations we have set forth. Not only did this all new E truggy out perform its predecessor, it annihilated it. It was faster, more durable, easier to drive and straight up vicious on the race track. Without Further a due, let’s get started with all the new features of the SRX8-T Electric.
- Part No. : SER600065£761.94
The SRX8GTE WC is based on the SRX8GTE that has proven his great potential on the World championships in Miami this Jan 2020. The SRX8GTE WC shares many high performance parts from the successful SRX8 platform. In addition to the details carried over from the SRX8 platform, we have introduced many new, design concepts to push the SRX8GTE WC well into the future as well as set its self apart from all competition.
- Part No. : SER600066£891.00
The SRX8GT ‘23 has been re-worked from the ground up. Customer and racers alike wanted a faster, lighter, more nibble and reliable race car heading into the new racing season. Although we have enjoyed many great race wins and successes in the world of GT racing, it was time for us to push the evolution of the class yet again. The engineering group went to work, discussing all aspects and weak points of our previous model. After countless concepts and discussions, we had formulated the best possible plan to create the greatest successor we could. With nothing short of maximum performance on the track and devilish good looks on the pit table, the new SRX8GT ‘23 was born; we don’t think you will be disappointed.
- Part No. : SER804012£790.56
The Serpent 750 Evo Natrix is the evolution of the ultra-successful 750. To improve the car we left no stone unturned and tried our ultimate best to make an even better car
- Part No. : SER804013£665.10
The Serpent 750E Natrix is the latest Electric version of the 750. Electric racing has developed big time, the possible power is huge. Especially in the popular dragster class in the US the power going through the transmission is extreme. The 750E is designed to take care of that power and put it down as effective as possible. The 750E is based on the ultra-successful 750 gas racer and shares it’s suspension, shocks and quite a lot of other features like the chassis plate or the driveshafts
- Part No. : SER903020£927.36
The Serpent Viper 990th is the successor of the successful 989. We have spent a lot of testing and research to improve the 989 platform. We put a lot of emphasis on the flex characteristic since that showed very promising results. On top of that we improved weight, weight distribution and ease of maintenance. Beside all these new features we kept 90% of our proven transmission and our excellent shock absorbers.
- Part No. : SER904005£804.96
The Serpent 989E Viper is the latest Electric version of the 989. Electric racing has developed big time, the possible power is huge. Especially in the popular dragster class in the US the power going through the transmission is extreme. The 989E is designed to take care of that power and put it down as effective as possible. The 989E is based on the ultra-successful 989 gas racer and shares it’s suspension, shocks and quite a lot of other features like the chassis plate or the driveshafts