We got this great ZX6 report From Kyosho driver Rhys Herd during a Holiday to his home Country of Canada !

image-4 image-1 image-2 image-3

 

This weekend marked the yearly Triple A-main hosted by Sid's RC Raceway located in Mississauga, Ontario, Canada.  It was my first time at this meeting and track! The event had a great turn out of drivers running many different classes 2WD, 4WD Buggy, 2WD, 4WD SCT, 2WD Stadium truck and a mini T class.

I ran the all new Kyosho Lazer ZX6 equipped with Team Orion electronics and Aka Tyres. The car, electronics and tyres were rapid all day!

First up was 3 rounds of 5 minute controlled practice. I used round 1 to get to know the track layout and driving on a low-mid bite dirt surface. This was my first time out with the ZX6 on dirt so I made a couple changes to the car after round 1. 
 
Round 2 the car started to feel much better after going to Gold springs all round  making the car a bit softer and to Super soft impact all round.

Round 3 I put on a Rudebits R1 wing which added more rear traction.

Next up was 3 rounds of qualifying best 2 out of the 3 count!
 
Round 1  The track was getting to it's best as it started to groove up. I put in some good laps with a couple of small mistakes on the double double at the back of the track. But still put in a good time getting 4th in the round overall.
 
Round 2 I changed the rear camber link position which I knew would help.  The car was feeling great but I had a hard landing which was my fault and meant I was out of round 2.

Round 3 All I needed to do was have a nice clean run to keep me in the A Main. Went in .5 degrees on the rear toe and the car was rapid. I was able to get another 4th in the round; times in round 3 were close as all the drivers and cars were at their best.

With two 4th's overall in qualifying I was placed 4th on the grid for the 4WD A main!
 
The A mains had three legs.

Leg 1 I kept it clean and finished up with a 3rd

Leg 2 the track started to blow out with so many cars going around! A few mistakes meant I finished up 6th
 
Leg 2 all I needed to do was gain one place to finish on the podium. I did this and finished up with a 3rd overall!

I'd like to say a HUGE Well done to Sid's raceway for putting on a great event and working through out the day non stop in the 30* C heat to keep the track in good condition!
 
The People racing at Sids are great people, very kind and welcoming with helping me out with a table and some under cover pitting!

Thanks a lot and look forward to coming next year!
 
Rhys Herd

 

We got this great ZX6 report From Kyosho driver Rhys Herd during a Holiday to his home Country of Canada !

image-4 image-1 image-2 image-3

 

This weekend marked the yearly Triple A-main hosted by Sid's RC Raceway located in Mississauga, Ontario, Canada.  It was my first time at this meeting and track! The event had a great turn out of drivers running many different classes 2WD, 4WD Buggy, 2WD, 4WD SCT, 2WD Stadium truck and a mini T class.

I ran the all new Kyosho Lazer ZX6 equipped with Team Orion electronics and Aka Tyres. The car, electronics and tyres were rapid all day!

First up was 3 rounds of 5 minute controlled practice. I used round 1 to get to know the track layout and driving on a low-mid bite dirt surface. This was my first time out with the ZX6 on dirt so I made a couple changes to the car after round 1. 
 
Round 2 the car started to feel much better after going to Gold springs all round  making the car a bit softer and to Super soft impact all round.

Round 3 I put on a Rudebits R1 wing which added more rear traction.

Next up was 3 rounds of qualifying best 2 out of the 3 count!
 
Round 1  The track was getting to it's best as it started to groove up. I put in some good laps with a couple of small mistakes on the double double at the back of the track. But still put in a good time getting 4th in the round overall.
 
Round 2 I changed the rear camber link position which I knew would help.  The car was feeling great but I had a hard landing which was my fault and meant I was out of round 2.

Round 3 All I needed to do was have a nice clean run to keep me in the A Main. Went in .5 degrees on the rear toe and the car was rapid. I was able to get another 4th in the round; times in round 3 were close as all the drivers and cars were at their best.

With two 4th's overall in qualifying I was placed 4th on the grid for the 4WD A main!
 
The A mains had three legs.

Leg 1 I kept it clean and finished up with a 3rd

Leg 2 the track started to blow out with so many cars going around! A few mistakes meant I finished up 6th
 
Leg 2 all I needed to do was gain one place to finish on the podium. I did this and finished up with a 3rd overall!

I'd like to say a HUGE Well done to Sid's raceway for putting on a great event and working through out the day non stop in the 30* C heat to keep the track in good condition!
 
The People racing at Sids are great people, very kind and welcoming with helping me out with a table and some under cover pitting!

Thanks a lot and look forward to coming next year!
 
Rhys Herd