SCORPION XXL NITRO READYSET Kyosho

The all terrain Scorpion XXL is now smoking nitro!! Designed for pure bashing fun and also track racing !!

The new Kyosho Scorpion XXL combines the dynamic off-road performance craved by off-road racers with easy drivability of a XXL scale off-road machine. The slow, typically lazy response of current big scale models make it more difficult to find suitable locations to race them. Kyosho creates a whole new and exciting reality for large scale fans, delivering a machine that's slightly more compact, but features the explosive performance and lightning-quick reflexes of a finely-tuned racing machine. Completely new chassis design! The 3mm main chassis features a molded "perimeter" frame that results in rock-solid rigidity. In addition to providing superior suspension travel, the low shock mounting position of the front "gull" arms keeps the shocks as low as possible for maximum cornering speeds and exceptional stability over the roughest surfaces. This is complimented by a modern rear suspension typical of 1/10-scale race cars, strengthened to produce a robust suspension system for this big machine. The front suspension and steering geometry result in superior large-scale handling like never before.
To give the customer an intense and fun driving experience. Easy to wrench and maintenance. Reliable Easy to start high torque XXL Engine outputs intense power. Designed and tuned for nitro configuration.
200cc XXL size fuel tank will easily allow 15min of run time.

XXL Engine(.28 size) : All new Reliable, High Power and Easy to tune engine. Rear Ehaust Pipe system : Exhaust pipe comes out of the rear. High performance tuned pipe. True realism.

3mm high grade aluminum chassis with double wall chassis brace : Chassis is
compatible with starter box systems. KS203 Servo : Water proof, super high response and high torque servo with metal gears allows linear controls even with dry cell batteries.

Equipped with a Engine stopper : Switch located on the right side of the car allows to stop the engine instantly. Easy and safe design.

200cc Fuel tank : XXL size fuel tank will allow about 15min of run time before re-fuel.
Easy fuel system allow quick refueling just by pulling up the front air duct.

The receiver box is just the right size for the compact KR200 receiver. The mounting position is as far as possible from the electronics to reduce potential interference.
Features hex type screws for secure assembly and sharp looks too.
The molded front and rear shock towers feature ultra rigid construction for precision performance, while allowing just enough flex to maximize durability.
Molded roll bar and roof can be installed with dummy fog lamps. Roll bar is already pre-installed on the Readyset.
Includes a wing mount that allows installation of the rear wing from the Inferno MP9 (optional). Slight modification to wing is required.

＜ ReadySet Contents ＞

Factory assembled chassis with 2-channel, 1-servo, 1-ESC R/C unit
Syncro KT-201 transmitter
Pre-painted body
Pre-installed Kyosho XXL Motor .28 size
Cross wrench

Required for Operation

8 AA battery (4pcs for transmitter, 4pcs for chassis),
Battery charger
Fuel, Glow Plug heater and Fuel Bottle

Chassis Technical Data

Length	630mm
Width	402mm
Height	244mm
Wheelbase	452mm
Tread (F/R)	353 / 331mm
Tire(F/R)	Φ130×43mm / Φ140×71mm
Gear Ratio	16.0：1
Weight	4000g（with body）
Motor	XXL 28 size

← Previous Next →